Silicon carbide- Green

It is one kind of black silicon carbide Abrasive grain, To get the kind of grains, we specially process the ingots, separate the magnetic material, and sieve the grains carefully to get a complete range of grit sizes.

As an abrasive, CF-16 is used in making vitrified bonded grinding wheels, resign bonded grinding wheels. As loose grains, it is widely used for pressure blasting, surface finish and other general industrial applications.

MSDS Silicon Carbide

1. Product Name Company

Silicon Carbide
KOWA ABRASIVE K.K.
2266 Anamushi Kashiba City NARA JAPAN
+81-745-76-3702
0745-76-3704

 

2. Composition/Information

Chemical Name: Silicon Carbide

 CAS number:409-21-2

 Impurities contributing to There are no restrictive to the regular use of the product the hazard:

3. Hazards Identification

Adverse human health Effects: High concentrations would cause irritation to the respiratory system Environmental Effects: No environmental effect has been identified in the regular use of the product Physical and Chemical Hazards: No physical or chemical hazard has been identified in the regular use of the product

Specific Hazards: No specific hazard has been identified in the regular use of the product

4. First aid Measures

Inhalation: In case of respiratory difficulties, move to ventilated areas and look for medical assistance, Skin Contact: In case of skin irritation, wash the affected local with fresh water and look for medical Assistance

Eye Contact: In case of eyes irritation, wash your eyes with fresh water, and look for medical assistance Ingestion: Look for medical assistance.

5. Fire-Fighting Measures

General Information: Not Flammable.Extinguishing Media: Use the adequate extinguisher according to the fire source.

6. Accidental Release Measures

Personal Precautions: In high levels of airborne exposure, respiratory and eyes protection. If possible, use a exhausting system. Environmental Precautions: This product is inert to the environment and don`t request any special precaution

7.Handling And Storage

Handling

Technical Measures: There are no restrictions.

Precautions: Material may be stared in dry and ventilated local, avoiding humidity contact. Avoid contact with other products to prevent contaminations. Respect a maximum of three pallets or big bags stack. This material must be kept away from sharp-edged materials to avoid package damaging. Safe handling Advice: Respect the maximum stack of three pallets or super sacs.

Storage

Technical Measures: There are no restrictions.

Storage conditions: May be stored in dry, ventilated and free of contaminations. It’s not recommended humidity

Levels higher than 65%.

Incompatible Products: No restrictive information has been found about incompatible products during storage.

Packing Materials: It’s recommended to main the material in its original packing, including original pallet.

8. Exposure Controls/Personal Protection

Personal Protective Equipment

Respiratory Protection: In normal conditions a NIOSH/MSHA approved air respirator is recommended.

Hand Protection: Impervious gloves are recommended.

Eye Protection: Approval Chemical workers goggles.

Skin and Body Protection: Entire body clothes are recommended.

Airborne Exposure Limit:6mg/

9. Physical and Chemical Properties

Physical State: Solid

Color: Black

Odor: Odorless

ph{24%} : 9

Fusion Point: 2600

Flash Point: Not applicable

Explosion Properties: Not applicable

Density: 3.20g/ cm²

Solubility: Not soluble in water

10. Reactivity

Hazardous Reaction: There are no restrictions.

Hazardous Decomposition Products: There are no restrictions in the regular use of the material.

11. Toxicological Information

 Acute Toxicity: There are no restrictions in the regular personal exposition. Local Effects: There are no restrictions in the regular personal exposition. Other Indication: The inhalation of dust must be prevented, because inert material can also harm the respiratory ways.

12. Ecological Information

Information related with normal routes of exposition had not been found . Environmental problems are not expected when the product is handled and used as indicated.13.Disposal Considerations Waste from Residues: Waste of this product must be dispose of in accordance with federal, state and local regulations.

There is no restrictive hazardous information about recycling this product. Residues of this product must be disposed according to the regulation. Contaminated Packing: Waste of this product packing must be dispose of in accordance with federal, state  and local regulation.

13. Contaminated Packing :

Waste of this product packing must be dispose of in accordance with federal ,state and local regulations. There is no restrictive hazardous information about recycling the packing.

14. Transport Information

Transport Information: There are no restrictions.

15. Regulatory Information

 There are no specific international regulations for this product. State and local regulations must be consulted.

16. Other Information

It is not required any special procedure to collect the material. This electro fused is not recommended for use in food, medicine and cosmetic products. The improper use of this product or its information above exempts KOWA of any responsibility.

All data showed in this document are typical, small variations may occur.

Silicon Carbide- Black Micro


Description:

High quality, water classified silicon carbide powders graded to exacting standards, e.g. FEPA, JIS and custom. Silicon carbide powders are manufactured by various techniques to optimize shape, surface area, density, chemistry and/or particle size distribution for various applications.

Applications:

Our powders are used for wiresawing semiconductor materials, lapping, fine bonded and coated application, refractory, precision ceramics, composites and other critical applications. Material is available for hot pressing, sintering and other forming techniques.


Typical Chemical Analysis:

Silicon Carbide(SiC) 97.80%
Silicon (Si) 0.30%
Silicon Dioxide (SiO2) 0.50%
Carbon ( C ) 0.30%
Iron (Fe) 0.08%
Aluminum (Al) 0.10%

Physical Characteristics:

Crystal Form: Hexagonal (Alpha SiC)
True Density: 3.95 g/cm3
Hardness: Knoop (100) – 2500; Mohs 9.0+
Melting Point: SiC does not melt but dissociates
Color: Black

 


Sizing Test Methods:

FEPA Standard 42-2: 2006
JIS R 6001: 1998
Micron sizes based on Coulter Multisizer

 


FEPA F Standard – Powders/Microgrits

D3% D94%
Size Max. D50% Min.
240 70 42.5-46.5 28
280 59 35.0-38.0 22
320 49 27.7-30.7 16.5
360 40 21.3-24.3 12
400 32 16.3-18.3 8
500 25 11.8-13.8 5
600 19 8.3-10.3 3
800 14 5.5-7.5 2
1000 10 3.7-5.3 1
1200 7 2.5-3.5 1(80%)

 


 

Packing:

20 Kg/25Kg Paper bags, 25 Kg PP bags,50 Lbs Paper bags, 2000lbs Jumbo,1MT Jumbo Bags etc.

Silicon Carbide- Green Micro


Description:

High quality, water classified silicon carbide powders graded to exacting standards, e.g. FEPA, JIS and custom. Silicon carbide powders are manufactured by various techniques to optimize shape, surface area, density, chemistry and/or particle size distribution for various applications.

Applications:

Our powders are used for wiresawing semiconductor materials, lapping, fine bonded and coated application, refractory, precision ceramics, composites and other critical applications. Material is available for hot pressing, sintering and other forming techniques.


Typical Chemical Analysis:

Silicon Carbide(SiC) 99.15%
Silicon (Si) 0.14%
Silicon Dioxide (SiO2) 0.34%
Carbon ( C ) 0.11%
Iron (Fe) 0.09%

Physical Characteristics:

Crystal Form: Alpha-Alumina
True Density: 3.95 g/cm3
Hardness: Knoop (100) – 2500; Mohs 9.0+
Melting Point: SiC does not melt but dissociates
Color: Green

 


Test Methods:

FEPA Standard 42-2: 2006
JIS R 6001: 1998
Micron sizes based on Coulter Multisizer

 


FEPA F Standard – Powders/Microgrits

D3% D94%
Size Max. D50% Min.
240 70 42.5-46.5 28
280 59 35.0-38.0 22
320 49 27.7-30.7 16.5
360 40 21.3-24.3 12
400 32 16.3-18.3 8
500 25 11.8-13.8 5
600 19 8.3-10.3 3
800 14 5.5-7.5 2
1000 10 3.7-5.3 1
1200 7 2.5-3.5 1(80%)

 


 

Packing:

20 Kg/25Kg Paper bags, 25 Kg PP bags,50 Lbs Paper bags, 2000lbs Jumbo,1MT Jumbo Bags etc.

SiC Macro Bonded

 

Description:

The high density black silicon carbide fused by heating high purity silicon sand and carbon in a big electrode furnace at above 2500 0C With high density, big crystal, and good purity, it is widely used in abrasive, refractory and ceramic industry.

KCF-16 is a black, friable, medium bulk density silicon carbide abrasive grain. To get this kind of grains, we specially process the ingots, separate the magnetic material, and sieve the grains carefully to get a complete range of grit sizes.

Applications:

KCF-16 is used in making vitrified bonded grinding wheels, resign bonded grinding wheels. As loose grains, it is widely used for pressure blasting, surface finish and other general industrial applications.

Typical Chemical Analysis:

SiC                            98.60%
Free Carbon               0.16%
Fe2O3                        0..33%

Physical Properties:

Color                         Black
Shape                       Angular
Crystal Form              Alpha silicon carbide in hexagonal system
Specific Gravity          3.21
Hardness                   2750 kg/mm, 9.2 Mohs scale
Magnetic Material       0.0065%
 

Macrogrit Grain Sizes Available (F):

12, 14, 16, 20, 22, 24, 30, 36, 40, 46, 54, 60, 70, 80, 90, 100, 120, 150, 180, 220.

 

Microgrit Sizes Available (F):

240, 280, 320, 360, 400, 500, 600, 800, 1000, 1200. 

Typical Bulk Density:

Grit(F)     g/cc       Grit(F)     g/cc         Grit(F)     g/cc       Grit(F)     g/cc

12          1.56          30       1.54            60         1.52       120         1.44

14          1.56          36       1.54            70         1.50       150         1.42

16          1.56          40       1.54            80         1.48       180         1.39

20          1.55          46       1.54            90         1.47       220         1.38

24          1.55          54       1.54            100       1.46

Grain Size Distribution :

Upon ANSI B74.12-2001, FEPA-Standard 42-1:2006 or ISO 8486-1.

Packing:

20 Kg/25Kg Paper bags, 25 Kg PP bags,50 Lbs Paper bags, 2000lbs Jumbo,1MT Jumbo Bags etc.

SiC Macro Coated

Description:

KCP-16 is a kind of high pure black silicon carbide grain for coated abrasives. With the concentrated size distribution and sieving strictly based on FEPA standard,the flake and needle grit shape were carefully kicked out, KCP-16 can help coated abrasives tools to perform a more excellent working efficiency.

Applications:

CP-16 is widely used for making coated abrasives products like sanding paper, sanding cloth, sanding belt and jumbo rolls for working on the metals material.

Typical Chemical Analysis:

Al2O3                          98.47%
Free Carbon                 0.14%
Fe2O3                          0.18%


Physical Properties:

Color                         Black
Shape                       Angular
Crystal Form              Alpha silicon carbide in hexagonal system
Specific Gravity          3.21
Hardness                   9.2 Mohs scale
Magnetic Material       0.0065%

 

Macrogrit Sizes Available (P):

12, 16, 20, 24, 30, 36, 40, 50, 60, 80, 100, 120, 150, 180, 220.

Microgrit Size Available (P):

240, 280, 320, 360, 400, 500, 600, 800, 1000, 1200, 1500, 2000, 2500.

Typical Bulk Density:

Grit(P)     g/cc           Grit(P)     g/cc             Grit(P)    g/cc
12           1.55           36          1.57                100      1.44
16           1.56           40          1.54                120      1.43
20           1.56           50          1.54                150      1.42
24           1.57           60          1.53                180      1.41
30           1.57           80          1.46                220      1.40

 

Grain Size Distribution :

Upon ANSI B74.18-2006, FEPA-standard 43-1:2006 or ISO 6344-2: 1998

Packing:

20 Kg/25Kg Paper bags, 25 Kg PP bags,50 Lbs Paper bags, 2000lbs Jumbo,1MT Jumbo Bags etc